 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VCXO Page 1 of 3 VS9P: PLL LVPECL SERIES: LOW COST UHF/HF VCXO, LVPECL, +3.3 VDC DESCRIPTION: A low cost voltage control crystal oscillator, high frequency, highly stable oscillator, adhering to Low Voltage Differential Signaling (LVPECL) Standards. The output can be Tri-stated to facilitate testing or combined multiple clocks. The device is contained in a sub-miniature, very low profile, leadless ceramic SMD package with 6 gold contact pads. This miniature oscillator is ideal for today's automated assembly environments. APPLICATIONS AND FEATURES: " " " " " " Infiniband; Fiber Channel; SATA; 10GbE; Network Processors; SOHO Routing; Switches; Common Frequencies: 150 MHz; 156.25 MHz; 155.52 MHz; 161.1328 MHz; 212.5MHz; 312.5MHz +3.3 VDC LVPECL Frequency Range from 750KHz to 800 MHz PLL multiplication (F>25MHz) Miniature Ceramic SMD Package Available on Tape and Reel Lead Free and ROHS Compliant SYMBOL Ta T(stg) Vcc Vi Vo VALUE -40...+85 -55...+90 +4.6 Vss-0.5...Vcc+0.5 Vss-0.5...Vcc+0.5 UNIT C C VDC VDC VDC $ " ABSOLUTE MAXIMUM RATINGS: PARAMETER Operating temperature range Storage temperature range Supply voltage Maximum Input Voltage Maximum Output Voltage $ ELECTRICAL PARAMETERS: PARAMETER SYMBOL fo Vcc Is Connected between each output and Vcc - 2.0 VDC min max Measured at 50% of output voltage swing Measured at 20/80% and 80/20% output voltage swing Integrated Phase tji RMS, Fo=155.52MHz Fj = 12 kHz...20 MHz5 Fo=622.08MHz Fo=155.52MHz. Random period Jitter Rj using wavecrest analyzer 4 Fo=622.08MHz Fo=155.52MHz. Acumm. Peak to Peak Jitter Tp-p using wavecrest analyzer*4 Fo=622.08MHz f=10 Hz f=100 Hz f=1 KHz f=10 KHz typ. @155.52MHz6 f=100 KHz f=1M Hz f=10M Hz f>20M Hz Op. Temp., Aging, Load, and Supply Variations TEST CONDITIONS*1 VALUE 0.75 to 800 +3.3 5% 100.0 MAX LVPECL 50 Vcc-1.025 Vcc-1.620 40/60 to 60/40 or 45/55 to 55/45 0.7 TYP 1.0 MAX*2 2.6 TYP** 2.5 TYP** 4 TYP ** 6 TYP ** 30 TYP** 40 TYP** -60 -90 -120 -125 -121 -121 -140 -145 <50*(Note 7) UNIT MHz VDC mA VDC VDC % ns ps ps ps Nominal Frequency Supply Voltage Supply Current Output Logic Type Load Output Voltage Levels Duty Cycle Rise / Fall Time Voh Vol DC tr / tf Jitter J Phase Noise (f) dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ppm Overall Frequency Stability typ. f/fc Control Voltage Range Settability Absolute Pull Range Input Impedance Modulation Bandwidth Enable High Option; Pin 2 Output Enabled Output Disabled Enable Low Option; Pin 2 Output Disabled Output Enabled VC Vfo APR Zin BW En Dis Dis En Positive slope; 10% linearity MAX Minimum guaranteed freq. pull over f/fc, over all conditions -3 dB High Voltage or No Connect Ground High Voltage Ground or No Connect th 0 to +3.3 +1.65 0.25 See Part Numbering 10 MIN 10 MIN 0.7*Vcc MIN 0.3*Vcc MAX 0.7*Vcc MIN 0.3*Vcc MAX VDC VDC ppm k kHz VDC VDC VDC VDC RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 St ! Miami, Florida 33172 ! U.S.A. phone: (305) 593-6033 ! fax: (305) 594-3973 ! e-mail: sales@raltron.com ! WEB: http://www.raltron.com VCXO Page 2 of 3 *1 Test Conditions Unless Stated Otherwise: Nominal Vcc, Nominal Load, +25 3C *2 Frequency Dependent *3 May not be Available With All Temperature Ranges or Frequencies -- Please Consult Factory *4 Measured with Wavecrest SIA-3000A 10,000, Cycles no filtering *5 Calculated from Agilent 5500 phase noise measurements *6 Measured with Agilent 5500 *7 Tighter stabilities maybe available upon request - please consult factory $ PART NUMBERING SYSTEM: SERIES SYMMETRY A: 40/60 to 60/40% T: 45/55 to 55/45% TEMPERATURE RANGE (C) R: S: U: V: 0...+50 0...+70 -20...+70 -40...+85 ABSOLUTE PULL RANGE K: 20 ppm I: 25 ppm F: 32 ppm H: 50 ppm G: 80 ppm J: 100 ppm*(note 3) FREQUENCY (MHz) 0.75...800.000 Enable/Disable Enable High - standard (Omit Suffix) EL; Enable Low VS9P: UHF +3.3Vdc VCXO with LVPECL Comp. Output EXAMPLE: VS9PASH -155.520 VCXO, 7x5mm Package, +3.3 VDC Supply Voltage, LVPECL Output, Standard Symmetry, 0...+70C Operating Temperature Range, 50 ppm APR, 25 ppm stability, 155.520 MHz $ MECHANICAL PARAMETERS: INDICATES PIN 1. .197 .008 5.0 0.2 OUTLINE TOLERANCE: 0.006" / 0.15mm (Unless otherwise specified) PIN FUNCTIONS: [1] VOLTAGE CONTROL [2] ENABLE/ DISABLE, OR NO CONNECT [3] CASE GROUND [4] OUTPUT [5] COMP. OUTPUT [6] SUPPLY VOLTAGE MARKING: VS9PASH 155.52 RAL D/C *0.01F external by-pass .276 .008 7.0 0.2 .079 MAX. 2.00 MAX. .200 5.08 .100 2.54 1 .050 1.27 .079 TYP. 2.00 TYP. 3 .150 3.81 2 .087 2.20 6 5 .055 TYP. 1.40 4 .071 1.80 .100 2.54 filter is recommended as seen on solder pattern. SOLDER PATTERN RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 th St ! Miami, Florida 33172 ! U.S.A. phone: (305) 593-6033 ! fax: (305) 594-3973 ! e-mail: sales@raltron.com ! WEB: http://www.raltron.com VCXO Page 3 of 3 ! REFLOW PROFILE: RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 th St ! Miami, Florida 33172 ! U.S.A. phone: (305) 593-6033 ! fax: (305) 594-3973 ! e-mail: sales@raltron.com ! WEB: http://www.raltron.com |
Price & Availability of VS9PTRH
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |